Overview
This topic describes how to quote a Special Digital Product.
Print Quote Window
Step by Step
| 1. |  From the Main Menu, click the Quote button. |
| 2. | Click the F2 button. |
| 3. | Click Digital in the black panel on the right, then double-click Digital, D4/1, 8-1/2 x 11. |
This step is mandatory if the Print Quote window shows a product in one category (Offset, Digital, or Copy) and you want to define a Special Product in another. You can't jump categories. For example, if the Print Quote window shows an Offset product and you press Ctrl-F2 (the next step below), you can select from and then modify any Offset product, but it has to be Offset. It can't be a Copy product or Digital.
| 4. | Click the button to the right of the F2 button, or hold down the Ctrl-Key and press F2. |
| 5. | Enter "Bestbuy Mailers" in the Name field. |
Special Digital Window
| 6. | Click the small button in the black panel (pointed to by the arrow) to change the run configuration from 4/1 to 4/4, from four-color on the front and black on the back, to four-color both sides. |
| 7. | Left-click the Variable Data slider until it shows 100%. At that setting, every sheet will be personalized. |
| 8. | Click the rightmost radio-button underneath Coverage to shift into high-range, then right-click the Coverage slider until it shows 40%. Much like the transfer case on a semi, the three radio-buttons extend the available values from the usual five to a total of fifteen. |
| 9. | Click the Properties button. Move the Makeready slider to High. Click Ok. |
Digital Properties Window
Zooming in
In the Print Quote window, click the white Product panel to open a Product Zoom window. The red indent on the Ctrl-F2 button tells us this is a Special Product. The D in D4/4 says it's Digital.
Product Zoom Window
See also