Overview
This topic describes how to update your Copiers and change their status. Taking a Copier off line, same as Digital, will prevent you from quoting the type of work associated with that unit. For one thing, you can't produce color copies on a black-only copier. And while there is often a good reason to run a one-color offset job on a two-color press (one-color press too small, too much ink coverage), making black copies on a color copier is almost always cost-prohibitive.
Press Selection Window
Changing the Status
Click the My Shop button, then check or uncheck the Copier to change its status.
Or, click Presses, then click the Delete button in the Press Selection window to take the highlighted Copier off line. A Copier that's off-line will have a red bullet in front of it. Clicking the button when a check-mark is showing will reinstate the Copier.
Press Update Window
Updating the Copier
| 1. | Click the My Shop button, then click Presses. |
| 2. | Double-click the Copier you want to update to select it. |
| 3. | Click the Sheetsize buttons to set minimum and maximum sheet sizes. |
| 4. | Fill in the rest of the entry fields. |
Document Feeding and Collating prices are the only charges specific to the Copier. The actual per-copy prices are determined by each individual Copy Product.
See also