Updating Digital Products
Contents
Overview
This topic describes how to update a digital product or create a new one.
1.
Click the My Store button, then click My Products.
2.In the black panel, click Digital.
3.
Click either the Add button to create a new digital product, or the Update button to edit an existing one. For this demo, we'll add a new product, based on "Digital, 8-1/2x11, D4/1, 2-up" over which we've placed the highlight bar.
4.Enter the Name (Catalog Sheets)
5.Click the up arrow in the black panel to change the Configuration to 4/4, four colors front, four colors back.
6.Right-click the Composition slider to lower composition to Medium. This is the setting to which this product will default. It can be changed when you make the quote, where you can enter the actual time in hours and minutes.
7.Click the Properties button.
With digital products, the slider for Spoilage has no effect on the number of sheets or envelopes used for the job.The transport mechanisms of modern digital presses are robust enough that we can safely ignore the few sheets or envelopes we waste while setting up. More significant are the occasional paper jams, not in terms of material costs but because of the time it takes to stop the press, free up the jam, and start up again. Aggregate run speed is a property of the product (size 6-1/4 envelopes may run slower and jam more often than size 10s), so when you make spoilage adjustments for a digital product, it will affect the run time. But only the run time, not the sheet count.
8.Click the left radio button under Coverage to shift to a lower range, then drag the coverage slider all the way up. Ink coverage should now read 25%.
9.Click the Packaging button and select the type of packaging.
See also